This is the second of three designs by Thrutheframe for the A1 mini. These 3 essential printable accessories that you will need for your new printer.
While the hardware for all 3 builds can be self-sourced, I am working with Veetec3D to offer an A1 mini Hardware Kit for all the 3 builds above. It will include the 6x3mm magnets, M3 screws, VHB, thin double-sided tapes, and pre-cut self-adhesive anti-slip pads. Printed parts are not included.
The price is 10€ with tracked shipping at 5€, making the total cost at 15€. We try our best to keep the pricing affordable for everyone to have easy access to the required hardware for all 3 builds. In addition, parts and labor are sourced within EU. If you like the designs by ThrutheFrame and wish to support his projects, do consider buying this kit. The royalty will go towards funding project consumables ie. filaments, materials, electricity, coffee, time, and my brain cells.
There are 2 types of build plates available for the A1 mini; PEI textured and PEI matte. Most people order extra plates just in case. Hence I designed this build plate holder/stand to organise up to 4 build plates for your A1 mini.
As the A1 mini may be the user's first 3D printer, I set up a few parameters when designing the stand:
There are 3 printed components. A1 is the main spline and B1s are the side support. 4 pcs of M3x8mm BHCS are required to secure both B1 to A1. Optional rubber or EVA foam can be used to improve grip on the table.
There are 3 versions of B1:
Download the 3mf file. The settings are prepared for printing PLA on an A1 mini. If you are printing on a different printer, please make the necessary changes to the settings. I have designed the parts based on 0.4mm nozzle and 0.2mm layer height. Print in 0.2mm layer height for accuracy.
Build Plate 01 - A1
A1 is the main spline and is required to print it. Note that it is printed at an angle on the 180x180mm build-plate and will need at least 4 top shell layers with the infill direction is 90 degrees. I have prepared the setting in Bambu Slicer. You will only need to change it if you are using the stl on a different slicer.
Build Plate 02 - B1 plain, No logo
You will need to print 2 pcs of this part. I have prepared the setting in Bambu Slicer. You will only need to change it if you are using the stl on a different slicer.
(Optional) Build Plate 03 - B1 with number and BL logo
Optional if you want a side support with some design. there are 2 designs.
(Optional) Build Plate 04 - B1 BL logo coloured
Optional if you want a dual color side support with Bambu Lab logo
To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like my designs and wish to contribute to my coffee addiction & help fund the filaments and materials needed for prototyping, a donation of $5-$10 to Ko-fi or paypal.me will be greatly appreciated.
As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion.