Greetings colleagues, this time I bring you one of the most iconic characters on television. I hope you like it!

The model is designed with PETG, but you already know that you can use PLA and you will achieve the same or similar result depending on the shade of the colors.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Gray
At layer #19 (1.6mm) swap to Gray
At layer #30 (2.48mm) swap to White for the rest.