Here is a hueforged football player, have fun ;)
If you are missing a shelf to put the picture or the other Hueforge pictures on the wall, take a look at my HueShelf ;)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Dark Gray Transmission Distance: 2.5
PLA Gray Transmission Distance: 3
PLA White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Dark Gray
At layer #20 (1.68mm) swap to Gray
At layer #25 (2.08mm) swap to White for the rest.