Z-Shield V1 - Z-Axis Cover for P1P, P1S, and X1C by Akelyte

Akelyte

3D Printer>3D Printer Parts

GIF

Print Profile(7)

All

X1 Carbon

P1S

P1P

X1E

All Plates - PLA Profile (0.16mm layer, 2 walls, 15% infill)

Designer

3.4 h

4 plates

4.9(156)

All Plates - PETG Profile (0.16mm layer, 2 walls, 15% infill)

Designer

4.1 h

4 plates

4.9(35)

All Plates - ABS Profile (0.16mm layer, 2 walls, 15% infill)

Designer

2.8 h

4 plates

4.6(24)

0.6mm nozzle, 0.18mm layer, 2 walls, 15% infill

2.2 h

4 plates

5.0(3)

Click to see more

Boost

428

906

276

1.5 k

1 k

Released

Description

V2 IS OUT! I HIGHLY RECOMMEND USING V2 OVER V1!

V2 CAN BE FOUND HERE — VERSION 2

--------------------------------------------------------------------------------------

Introducing the Z-Shield V1; a superior Z-Axis Cover for Bambu Lab P Series and X Series Printers. I’ve seen countless Z-Axis Covers for the P and X Series that simply sit in the recessed hole for the Z-Axis rod. I was never a fan of these designs, as I don’t want any component of my printer unnecessarily rubbing against plastic every time the bed moves.

These can be printed in PLA if chamber temps are kept on the low side, but printing in ASA or ABS would yield better results. I'd appreciate any feedback, comments, or ratings if you liked this model, or would like to see some modifications made!

Key Features:

Universal Compatibility: The Z-Shield has been meticulously engineered to be compatible with all Bambu Core-XY printers. Whether you own an older P1P or a top-of-the-line X1C, you’ll have no issues with fitment.
Fast Printing Capability: Efficiency is key in 3D printing, and the Z-Shield stands out in this regard. Printing with supports, most models should take an hour or less to print.
Camera-Friendly Design: Understanding the importance of the built-in camera in Bambu printers, I’ve added an additional model of the Z-Shield with a recessed corner. This design ensures that the cover remains completely invisible to the onboard camera, allowing for uninterrupted monitoring and recording.
Non-Contact Protection: The non-contact design ensures there's no friction between the cover and the moving parts of the printer, thus preserving both the cover’s and the printer's integrity.
Durability and Aesthetics: The Z-Shield not only offers robust protection against environmental factors but also adds a sleek, professional look to your printer.

Installation:

You should hear an audible click as the Z-Shield seats into position.

There should be approximately 1.2mm of clearance between your build plate and the Z-Shield on the left side of the printer. Make sure it is fully seated towards the left side of the printer. The right side cover will have plenty of clearance but should be installed in the same way.

Without Camera Cutout (Cover is Visible):

With Camera Cutout (Cover not Visible):

Comment & Rating (276)

@tagliasteel

I was a bit hesitant because of the comments complaining about the collision with the bed, but the model is actually a perfect fit. It is a great upgrade compared to my previous round plugs, which kept being dislodged. Thank you!

The designer has replied

@Akelyte

Thank you for verifying that everything fits well! If everything is installed correctly, there should be no issues with homing or bed collision. I may make a Z-Shield "Slim" in the future for those who want a bit more clearance.

@tagliasteel

Replying to @Akelyte :

I am not sure why it did not let me give a star rating, but it would definitely be 5 stars for me! I used your profile, just switched to ABS since I often print higher temp materials.

@casey.l.cooper

Replying to @tagliasteel :

You have to use the Bambu Handy App on your phone.. I also can not give a star rating using Chrome..

@Creative_3D

Print Profile

All Plates - PLA Profile (0.16mm layer, 2 walls, 15% infill)

Prints great, fits great, I used Jayo Carbon Fiber and Eryone Blue, Purple, Black Tri Color.

The designer has replied

@Akelyte

Oh thats real nice, I might have to buy some of that tri color!

(Edited)

@Creative_3D

Its one of my favorite colors to print things with!

@camerondurow

Print Profile

All Plates - ABS Profile (0.16mm layer, 2 walls, 15% infill)

they came out absolutely beautiful. looks way better than stock and it has functionality.

The designer has replied

@Akelyte

I love that orange color scheme! Thanks for the positive review!

@camerondurow

Replying to @Akelyte :

yeah black and orange go well together.

@PabloPicostco

Print Profile

All Plates - PETG Profile (0.16mm layer, 2 walls, 15% infill)

Printed the left and right plain surface ones out of PETG. Came out looking great, however the left one occasionally seems like it doesn't want to stay clicked all the way down. not sure if a warping or tolerance issue. But regardless of that, both stay on and do their job no problem

The designer has replied

@Akelyte

I've since updated the design; https://makerworld.com/en/models/164470#profileId-180595 V2 should work much better for you!

(Edited)

@PabloPicostco

Replying to @Akelyte :

oh nice okay, thank you

@mateoskyline

Print Profile

All Plates - PLA Profile (0.16mm layer, 2 walls, 15% infill)

The print came out and fits perfectly :)

The designer has replied

@Akelyte

DUDE! That's such a good picture! These look great!

(Edited)

@UmbrellaCorp

Print Profile

All Plates - ABS Profile (0.16mm layer, 2 walls, 15% infill)

Works an intendet, the clips schuld be 0.5 - 1 mm longer for better fitting

The designer has replied

@Akelyte

I've since made some adjustments, lengthening the clips being one. Heres V2 if you'd like to give it a shot! V2 - https://makerworld.com/en/models/164470#profileId-180595