I have a plant named Greg. Greg needed a new pot and people to know his name, hence, Greg the plant's pot that has a printed name tag to press on. The pot includes drainage holes and a base to drain into that is magnetically attached (if you so choose) with standard 4x2mm magnets x 8 total. The top surface of the pot is setup for ironing that gave me a great, smooth finish with Bambu PLA Marble. The top is setup to angle inwards to give a nice thick appearance without wasting too much filament.
I've included build plates I used with my P1P for three sizes:
180mm
126mm
90mm
The files are 3MF from Orca Studio, but let me know if STLs are preferred.
Name tag presses in easily and has editable text, I used Orcaslicer but let me know if you have issues opening/editing. Some names might be difficult to print without supports. The tag is setup to print at an angle with supports to allow for best definition.
The base and nametag are setup to print in the same filament, with the pot itself on its own plate. I printed my pot in Bambu PLA Marble and the base and nametag in iSanmate wood. I don't recommend iSanmate however, so the second plate is setup for Bambu PLA Basic.
Please let me know of any concerns and/or if you like Greg's house.