City Layer Led Lamp London Version 🌆🏙️🔦 is an ingenious combination of 3D printing 🖨️ and light 💡, creating beautiful works of art 🎨.

Materials needed:

• LED 💡
• Hot glue 🌡️ or tape 📏

How to assemble? 🛠️

1. Into the frame, put three printed layers of the city 🏢🏬🏭.
2. The next layer should be a diffusion layer 🔍.
3. Now you can add the spacing frame or just use duct tape/tape or hot glue to fasten everything in place. I prefer PVC Electrical Tape, because in the future there will be more city layers and you can reuse the frame, LED, and cover 🔁.
4. The last step is to glue the LED strip to the inside side of the box 📦.
5. The final step is assembling the cover, you can use glue or tape 🛠️📌.

There are two print profiles 🖨️👥. One is with a hole in the cover part 🕳️. The second print profile does not have a hole in the cover part - if you open that one, add a negative modifier in Bambu Slicer (cylinder) or drill the hole after printing 🌀🔩.

Here is the link to the New York version of the lamp

https://makerworld.com/en/models/130592#profileId-141693

I hope you will share your results 🌟. In the next days, I will prepare the next cities 🌆🌍. Let me know which city should be next in the comment 💬.