What is Print in Place PLUS? It's adding filament change stops to insert parts.
Filament change set to 18.4 (for .30mm layers 18.5)
Do not change color, instead just add tires and restart with same color.
Tires will be printed into the motorcycle permanently.
CAUTION - Be sure tires clear Pinda Sensor and Nozzle before continuing!!
it will be close but should not interfere. Follow directions step-by-step:
Step 1: Print 2 Tires. You will need these!
Step 2: At first stop add 2 Tires. Direction doesn't matter, they are symmetrical. Make sure they sit all the way down and clear the nozzle before continuing.
Looks very good. If you want to get rid of the small strings, you could use a lighter with a jet flame (e.g. this one: https://www.amazon.de/gp/product/B0BSLLR6TR/). Just a very short treatment and all strings are gone.
Absolutely amazing print. My 5 year old wanted to print a motorcycle for his dummy 13 and this was the best. He’s been playing with it everyday. It can stand on its own if positioned properly but the stand is a must if you want to display it properly.