My first attempt at a filament painting through HueForge.


Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA Generic White Transmission Distance: 7
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #12 (1.04mm) swap to Pure Yellow
At layer #14 (1.2mm) swap to White
At layer #17 (1.44mm) swap to White for the rest.