its over 9000 vegeta meme

************************ HueForge ************************

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 4

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Dark Red
At layer #6 (0.56mm) swap to Yellow
At layer #10 (0.88mm) swap to Ivory White for the rest.