I needed to print some battery holder wall mounts to tidy up my shop. I found this model and oriented it to print vertically without any supports on all bambu printers.

Materials Needed to Mount:

For mounting all you need is (2) #8 philips or torx screw, 1" or 1.5" length should be all you need. Be sure not to over tighten or else the PETG will crack.

Mounting Orientation:

You should be able to mount these either vertically or horizontally. The part is strongest when mounted vertically.

Print Profile Notes:

Nozzle: Suggest 0.4mm nozzle for precision fit
Wall Loops: 4 wall loops on 0.4mm nozzle, 0.6mm nozzle not recommended due to decreased layer adhesion.
Layer Height: Suggest 0.16 or 0.20mm to maximize strength (0.20mm default)
Infill: 20% gyroid (can bump to 25% for more strength)
Brim: None on textured build plate. Consider brim for smooth PEI plate.
Batch Size: For optimum layer adhesion advise printing one part at a time to keep layers hot (2 parts tops). For large Batches reduce fan cooling. PETG performs worse if layers cool too much, and you risk a layer shift on bed-slingers like A1.
Material: PETG or ABS
Color: Any
Print Orientation: Print vertically as seen in .3mf file.
Supports: None!
3d Printers: Should be printable on any printer.
Filament amount required: 87g per holder