This was created by request of a friend of mine who loves Prince.

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. This will save you time on your print as the first 0.64mm is just to provide stability to the print for display.

Final Size is 200x200mm
If you resize the model from 200 x 200 make sure you do NOT scale the Z axis or the print colours will not be in the same position

Please post a picture of your printed copy! I'd love to see it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu Black Transmission Distance: 10
PLA CC3D Silk Purple Transmission Distance: 5
PLA Overture Yellow Transmission Distance: 5
PLA Overture White Transmission Distance: 3

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Purple
At layer #21 (1.76mm) swap to Yellow
At layer #27 (2.24mm) swap to White for the rest.