改进了干燥箱卡料问题
除了3d打印件外,还需要:
1.气动接头PC4-01直通型;
2.定制亚克力板,厚度3mm,设计图见模型源文件
3.M3螺丝与螺母
4.特氟龙管,2.5*4mm(内径/外径)
Improved the issue of material jamming in the drying oven
In addition to 3D printing, it is also necessary to:
1. Pneumatic joint PC4-01 straight through type;
2. Customized acrylic board with a thickness of 3mm, design drawings can be found in the model source file
3. M3 screws and nuts
4. Teflon tube, 2.5 * 4mm (inner diameter/outer diameter)