If adjusting scale only adjust X&Y, leave Z as is for best results.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.17mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.65mm) swap to Dark Brown
At layer #12 (1.05mm) swap to Latte Brown
At layer #18 (1.53mm) swap to Jade White for the rest.
Print with different colours for a unique print.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.