Qidi X-Plus 3 Flat Front Panel Kit
Qidi X-Plus 3 Flat Front Panel Kit
Print Profile(0)
No Print Profile yet. Add one to earn points.
Description
This kit is for mounting a polycarbonate sheet in place of the original front panel. This allows for clear viewing of the first few layers while the door is closed. To use this kit you will need:
- 412x305mm Polycarbonate sheet (3mm thick)
- 4 x M5x16mm countersunk screws
- 5mm drill bit (for the polycarbonate)
- 2 x 10x3mm magnets (if you wish to use the magnetic closing on the door
Prior to drilling holes in the polycarbonate make sure the edge pieces are aligned properly on your machine as the polycarbonate sheet does not need to go entirely into the slots.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
