Funnel for AMS silica dry pod box by eds_3d_shop

eds_3d_shop

3D Printer>3D Printer Accessories

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

Designer

50 min

1 plate

4.9(61)

Funnel for Big silica pod [PLA]0.2mm layer, 2 walls, 20% infill

Designer

32 min

1 plate

4.8(11)

Funnel for Small silica pod (slim/corner) [PLA]0.2mm layer, 2 walls, 20% infill

Designer

33 min

1 plate

5.0(4)

Boost

141

284

157

605

431

Released

Description

⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏

Funnel for AMS silica/dry pods

Perfect funnels for big (three in the middle) and small (two slimone on the corner) silica dry pods for Bambu Lab AMS or AMS Silica Dry Box for Aqara Humidity Sensor 👌😍

Most funnels for the popular pods are inserted, have to be held by hand and do not allow the pods to be filled to the brim…😒

These funnels are very easily put on instead of the lid (but specifically not as tight as the lid!) and stay on the pods by themselves and can be comfortably held together with the pod on the funnel handle! In addition, the pods can be easily filled to the brim because they are clipped on from the outside.👌

A beautiful bamboo logo fits perfectly on the handle and there is a small grip-bar at the bottom, which is very comfortable to hold!

Print / Install Instructions (or just use one of my print-profiles!)

place them with the logo on the build plate
first layer line width: 0,38 (0.4 mm Nozzle) (for perfect look of the bambu-logo)
first layer speed: 20ms per second (for perfect look of the bambu-logo)
2 perimeter, 5 top, 3 bottom layer, 20% infill
top surface pattern: Concentric
bottom surface pattern: Concentric
print layer height: 0.2mm
WALL generator: Arachne

— ! —

Thanks for downloading, rating in advance and please don't forget to like this model! ;-)

Take a look at my another very helpful designs for X1/P1P/P1S/A1/A1mini:

🔗**Eds_3D_Shop designs on MakerWorld** 🔗

If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! https://linktr.ee/eds_3d_shop

Thank you for your support and.. happy printing!

Ed ;-)

Comment & Rating (157)

@KlausKolbe007

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

Passt perfekt 👌

The designer has replied

@eds_3d_shop

Wow! wirklich sehr coole Make! 🦾😎Dankeschön dafür! 🙏😍 Dürfte ich die tolle Bilder in Description aufnehmen? 🙏😍👍

(Edited)

@KlausKolbe007

Na klar

(Edited)

@eds_3d_shop

Replying to @KlausKolbe007 :

Top! Dankeschön! 🙏😍👍

@EricEJ

Boosted

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

Printed perfectly and no more desiccant all over the floor when filling my containers. Thank you for sharing.

The designer has replied

@eds_3d_shop

Thank you for your awesome rating, make and feedback! 🙏😍👍 It was the idea! 🤩👍 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃

@EricEJ

Boosted

Replying to @eds_3d_shop :

I was out of boosts for the week, but I planned on giving you a boost after I got a couple more. Boosting you now.

(Edited)

@eds_3d_shop

Replying to @EricEJ :

Thank you very much, Eric! 🙏😍 I’m happy to hear that this design is helping you. I can good understand it ✊😇👍

@wyld

Print Profile

Funnel for Small silica pod (slim/corner) [PLA]0.2mm layer, 2 walls, 20% infill

Works perfectly.

The designer has replied

@eds_3d_shop

Thank you for your cool make, feedback and awesome rating! 🙏😍👍 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃

@baky126

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

very good 3d model. thank you. printed on PTEG

The designer has replied

@eds_3d_shop

I’m happy that you like it! 🤟😃 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃

@PRINT3DGIFTS

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

looking really smooth!

The designer has replied

@eds_3d_shop

I’m really happy to hear and see that! 🤩👍Thank you for awesome feedback! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@toby_nz

It works perfectly when adding or removing silica from the corresponding AMS dry box system. Cherry on top, you can stack them into each other to save space. I don't know if this was intentional or accidental, but it is a nice feature.

The designer has replied

@eds_3d_shop

I’m really happy to hear and see that! 🤩👍Yea, you’re right - they are perfectly stackable to save the space on my Skadis board! 😉😅Thank you for awesome feedback! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@MiniBlaze

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

I printed these to fill the holders I plan to make for my AMS. The printed really nice. I'm still learning my way around the AMS so I ended up w/ White instead of Blue for my main color. I'll learn. There is a seam on the left one. I'm still learning and I suspect the seam is my fault. First time I've had show up on my print. These turned out really nice and in white they are really crisp looking.

The designer has replied

@eds_3d_shop

They are great! 🤩👍Thank you for awesome feedback! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@dtresinari

Great help to fill silica pods. Suggestion for the next version: Make a small dent on one side to return overflowing silica back to the original container.

The designer has replied

@eds_3d_shop

They are awesome! 🤩 I’m happy to hear and to see that! 🤩👍Thank you for awesome feedback, I will thin about it! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@rynnie

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

Functional AND looks good! Printed using BL PLA matte black and BL Basic Green.

The designer has replied

@eds_3d_shop

I’m happy to hear that! 🤩👍Thank you for awesome make and feedback! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

(Edited)

@alain.hesp

Print Profile

Both Funnels for Big and Small silica pods [PLA]0.2mm layer, 2 walls, 20% infill

Perfect, very good print with Bambu PLA ! Thank you.

The designer has replied

@eds_3d_shop

WOW! 🖐️😃I’m happy to hear that! 🤩👍Thank you for awesome make and feedback! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.