注意：尺寸根据Polymaker品牌耗材纸芯设计！

Attention: Size designed according to the POLYMAKER !!!
 

将使用完毕的FDM耗材环保纸盘内芯作为设计主体，主要由大三角配件（Triangle）通过两面固定来使纸盘内芯配合成组，同时小三角部件（unit stand link）可以将各个组链接起来，无论是竖直摆放还是横置摆放，都能找到你的个性化需求。

The used FDM consumables eco-friendly paper tray core will be used as the main design body, mainly composed of large triangle accessories (Triangle) fixed on both sides to match the paper tray core into a group. At the same time, small triangle (unit stand link) can connect various groups, whether placed vertically or horizontally, you can find your personalized needs.

提供两种背板（底板）：实心 和 带有掏空图案。

Provide two types of backboards (bottom plates): solid and with hollowed out patterns.

提供两种分隔配件：十字分隔 和 九宫格。

Provide two types of partition accessories: cross partition and nine grid.

图中大部分是由代用模型(unit model)来替代真实的环保纸盘内芯，因为我的手边目前只有5个环保纸盘内芯：P

Most of the images are replaced by unit models to represent the actual eco-friendly paper tray cores, as I currently only have 5 eco-friendly paper tray cores: P

当然你也可以选择直接打印待用模型来使用，但是强烈建议使用真实的纸盘内芯，在你打印足够多的耗材以后，也许你会有一面自己的环保成就墙面！

Of course, you can also choose to print the “unit model” directly for use, but it is strongly recommended to use a real paper tray core. After printing enough consumables, you may have your own environmentally friendly achievement wall!!!

注意事项：环保纸盘内芯的壁厚通常是不那么一致，在组装之前可以用笔刀修整边缘至合适的厚度，当然，小心不要划伤自己！

Attention: The wall thickness of the inner core of the environmentally friendly paper tray is usually not consistent. Before assembly, you can use a pen knife to trim the edges to the appropriate thickness. Of course, be careful not to scratch yourself!

我的打印设置：设备X1CC  0.4喷嘴  壁厚0.2  设备默认的Strength  skirt=1，部件“unit stand link”开启了普通支撑。

My printing settings:  X1CC    0.4 nozzle    wall thickness 0.2    device default “Strength”    skirt=1, component "unit stand link" has normal support enabled.