3D Printed Butterfly Knife
*If NOT printing the quick print for Bambu printer you will need-
*Additional Requirments-
MATERIALS:
2x MK5 Color Insert(optional)
4x MK5 GRIP 1 & 2
4x M4 14mm Screws
4x M4 Nuts
1x MK5 Blade
ASSEMBLY:
Step 1: Attach 2x MK5 Color to 4x MK5 GRIP 1 & 2
(as shown in Pic )
Step 2: Insert 4 M4 Nuts into 2x MK5 GRIP 1
(as shown)
Step 3: Insert 4 M4 14mm Screws into 2x MK5 GRIP 2
(as shown)
Step 4: Attach 1 MK5 GRIP 2 to MK5 BLADE
(as shown)
Step 5: Attach MK5 GRIP 1 on top of MK5 GRIP 2
(as shown)
Step 6: Repeat Step 4 (just make sure both MK5 GRIPS are not facing the same way)
(as shown)
Step 7: Tighten all screws and then loosen the top screws located CLOSEST to MK5 BLADE until Blade falls freely
(as shown)
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.