Articulated Cute Dragon
Copyright Claim
Articulated Cute Dragon
Boost
847
1262
406
Print Profile(12)
0.12mm layer, 2 walls, 15% infill
Designer
5.2 h
1 plate
0.2mm layer, 2 walls, 10% infill
3 h
1 plate
75% scale, 0.2mm layer, 3 walls, 10% infill
1.9 h
1 plate
0.2mm layer, 2 walls, 10% infill
2.8 h
1 plate
Click to see more
Boost
847
1262
406
40
4 k
2.9 k
Released
Description
The model does not require supports, the head is separate from the body, you can insert the head joint on the neck hole after print. If you need assistance just ask!
Keep in mind that the purchase of this model does not include a commercial license. If you want to sell prints of our models ,get all our creations in early access and exclusive models take a look at our Patreon Page!
⭐ ⭐⭐https://www.patreon.com/user?u=81262195 ⭐⭐⭐
Follow us on instagram to stay updated about new models !
Comment & Rating (406)
All
Love this Twisty Print baby dragon so much! I should have probably expected the heads to be snap on as a subscriber, but I still flung the poor little thing off the build plate. I suggest adding a note to the model description since the head is nice and nestled up with the body.
Printed with Stronghero Galaxy PLA for the body and JAYO yellow gold for the details. I used the two-color print profile that's not currently listed, so I wasn't able to rate 5 stars.
(Edited)
The designer has replied
1
Reply
Love this colors!! Thank you, just added in the description :)
1
Reply
Where can i find the two-color version?
0
Reply
Print Profile
75% scale, 0.2mm layer, 3 walls, 10% infill
Amazing. Love it.
(Edited)
The designer has replied
1
Reply
wow nice colour
0
Reply
Replying to @fizzy3D
Thanks :) It is pretty bad quality photo. I used Spectrum Premium PET-G 1.75mm Transparent Red for this.
0
Reply
Print Profile
75% scale, 0.2mm layer, 3 walls, 10% infill
That's a very cute dragon. He can also stand on his tails)))
Head mobility is limited because of the big neck, but he ends up looking cute! Thank you so much)
(Edited)
The designer has replied
1
Reply
thank you for the rating
0
Reply
Replying to @fizzy3D
Thank you for the model)
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
This dragon is simply perfect. I have modified the print profile by:
- reducing the outer layer speed to 40
- adaptive layer Hight
0
Reply
I'm new in 3D printing, could you please let me know how did you configure/use the adaptative layer... I have been reviewing several videos but they are not to clear to me. Thanks
0
Reply
Replying to @lugus83
I'm not sure how good your German is, but I tried my best to describe it in the attached file. I also uploaded my print profile to the model and it's pending verification. If you follow the 5 steps in the screenshot by selecting the object, opening the layer hight, set it to 0,3 and click adaptive then you should be good. You can manually tweak it on the right side as indicated with step 5. I hope it helps. I saw it on a TikTok Tutorial a few days ago and now I use it a lot to improve the models. Not every designer uses it.
(Edited)
1
Reply
Replying to @GoldichForge
Thanks, I was able to print it without any issues. great design
(Edited)1
Reply
Print Profile
75% scale, 0.2mm layer, 3 walls, 10% infill
Super cool model, really happy with the quality
The designer has replied
1
Reply
just careful with the head. after printed, when i try to take out from the bed, just realise the head can be detach and it can snap fit together. cool design btw.
0
Reply
Replying to @fizzy3D
everytime we attempt to put the head on the body it breaks off ! :(
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
easy pop on head
0
Reply
Der Rote/schwarze Drache sieht total cool aus.Was ist das für Filament?
(Edited)1
Reply
cookie cad and inland
0
Reply
Print Profile
75% scale, 0.2mm layer, 3 walls, 10% infill
Sehr schöner Druck.
The designer has replied
1
Reply
nice picture
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
Takes scary amount of force to pop on the head, but a very nice model. I’d give some more tolerance to the head (would trade it popping off I I pull it, for the model-breaking amount of force it takes to get on).
I also added a fuzzy skin to the entire back which (IMO) looks great on this model and hides the layer lines you would get. I’ll upload the 3mf if folks are interested.
1
Reply
well, indeed it looks good, but because of that the last 2 joints melted into this fuzzy skin and broke
0
Reply
Print Profile
75% scale, 0.2mm layer, 3 walls, 10% infill
Worked flawlessly on A1 Mini
(Edited)
The designer has replied
1
Reply
love to hear it. it cute right. the designer did a very good job.
0
Reply
Really cool Print, he even stands on his own 😄
1
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld