[gridfinity] Kitchen Packet/Baking Powder/Kitchen Powder Organizer (65mm up to 78mm powder packs)
Copyright Claim
[gridfinity] Kitchen Packet/Baking Powder/Kitchen Powder Organizer (65mm up to 78mm powder packs)
Boost
21
45
6
Print Profile(1)
OFFICIAL: 0.2mm layer, 2 walls, 15% Gyroid infill
Designer
36.9 h
16 plates
Boost
21
45
6
0
53
33
Released
Description
Gridfinity compatible Kitchen Powder Pack Organizer with variants for standard 65mm or up to 78mm wide powder packs, with layouts for 2x2x1.2 and 2x3x1.2 gridfinity units.
Additionally there are variants with a slot for easy gripping ("+GRIP" in model file name) and recesses for the standard gridfinity magnets/screws ("+MAGNET") on the underside, in case you want you need those.
Variants Overview:
2x2x1.2 Gridfinity Units:
- 2x2x1.2-GRID_65mm powder packs
- 2x2x1.2-GRID_65mm powder packs_+GRIP
- 2x2x1.2-GRID_65mm powder packs_+MAGNET
- 2x2x1.2-GRID_65mm powder packs_+GRIP+MAGNET
- 2x2x1.2-GRID_up to 78mm powder packs
- 2x2x1.2-GRID_up to 78mm powder packs_+GRIP
- 2x2x1.2-GRID_up to 78mm powder packs_+MAGNET
- 2x2x1.2-GRID_up to 78mm powder packs_+GRIP+MAGNET
2x3x1.2 Gridfinity Units:
- 2x3x1.2-GRID_65mm powder packs
- 2x3x1.2-GRID_65mm powder packs_+GRIP
- 2x3x1.2-GRID_65mm powder packs_+MAGNET
- 2x3x1.2-GRID_65mm powder packs_+GRIP+MAGNET
- 2x3x1.2-GRID_up to 78mm powder packs
- 2x3x1.2-GRID_up to 78mm powder packs_+GRIP
- 2x3x1.2-GRID_up to 78mm powder packs_+MAGNET
- 2x3x1.2-GRID_up to 78mm powder packs_+GRIP+MAGNET
This was model was made using the Gridfinity Parametric Fusion 360 Source File by Zack Freedman.
Comment & Rating (6)
All
Print Profile
OFFICIAL: 0.2mm layer, 2 walls, 15% Gyroid infill
i like it, but i think there is room for optimization.
0
Reply
printed file:
2x3x1.2-GRID_65mm powder packs_+GRIP.stl
filament: white PETG
0
Reply
Print Profile
OFFICIAL: 0.2mm layer, 2 walls, 15% Gyroid infill
Am Boden ein paar kleinere Probleme gehabt, da dort ein paar "Bohrungen" sind, die nicht ganz sauber gedruckt wurden.
0
Reply
Print Profile
OFFICIAL: 0.2mm layer, 2 walls, 15% Gyroid infill
0
Reply
Print Profile
OFFICIAL: 0.2mm layer, 2 walls, 15% Gyroid infill
0
Reply
Print Profile
OFFICIAL: 0.2mm layer, 2 walls, 15% Gyroid infill
(Edited)
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld