MUST READ - No brim used, but I did use the Bambu Lab liquid glue stick. Printed with 2 wall thickness and 15% infill stock settings. 3 walls would be stronger, but in my opinion, 2 walls is plenty strong for a desk organizer. Polylite PETG used. ~140g-160g depending on wall thickness.

This is a simple stacking organizer box that I made for all of my desk junk. I was going to print some Lego stackable bricks, but a 2x4 brick alone was a good 200g. I liked the look of this type of box, so I made my own, only cheaper. (though the Lego bricks are iconic and awesomely stackable) It is ‘simple’ in the sense that it does not require any supports. I only have tested it on a P1P, but as long as your A1 or X1 has good bed adhesion, it should work just as well. Its dimensions are 6.2*4.4*3.5. (l*w*h) And yes, two of these do fit on a 256*256*256 bed. This is only V1, so feel free to comment your thoughts for V2.