usr_29A

cover

PXL_20240120_032037702_09516a71-d3b3-41d5-9658-296995524107.jpg

PXL_20240120_033031868_4215ee34-4e6b-4fa0-9d94-a3b9ca0c4f70.jpg

plate_1.webp

PXL_20240120_032955896_ab52a1ea-5f47-4214-8d78-4ea7a261306c.webp

plate_1.png

Printed at 0.08mm mostly as a test, as I'm hoping that raising the lid repeatedly will work better with smaller layer lines, given how they align.  May later sand and smooth.  Printed with generic black PLA, and it fits well – not too tight, sits within the machine's groove.

0.08mm layer, 2 walls, 25% infill

0.2mm layer, 2 walls, 25% infill

PXL_20240122_004205165_65b3970b-48f2-46d5-bf99-ecc4db47fc2c.webp

PXL_20240122_005105327_9a2caf55-6e7f-424a-a981-643551cf3494.webp

You'll need a screw and a washer.  Knob is scaled up from <a target="_blank" href="https://makerworld.com/en/models/71226" rel="nofollow noopener">https://makerworld.com/en/models/71226</a> by <a target="_blank" href="https://makerworld.com/en/u/242156428" rel="nofollow noopener">Harley3D</a>.  I kept the hole at 3mm because that works for a screw I had available, and I didn't want to use glue where the join will be stressed daily.  Note that I drilled a hole in my lid that was already printed, but this profile includes a lid with a hole included already.&nbsp;Further idea:  Might want to increase the thickness of lid top, as that's feeling a touch flimsy.&nbsp;Note: the <a target="_blank" href="https://makerworld.com/en/models/71226#profileId-75425" rel="nofollow noopener">handle</a> portion is covered by a different license (CC-BY-NC-SA).

Hopper with Knob, 0.2mm layer, 2 walls, 15% infill

Single doser for Baratza Sette 270* grinders

Original hopper by <a target="_blank" href="https://www.thingiverse.com/fns720" rel="nofollow noopener">fns720</a> was posted at <a target="_blank" href="https://www.thingiverse.com/thing:3686357" rel="nofollow noopener">https://www.thingiverse.com/thing:3686357</a>, licensed under <a target="_blank" href="https://creativecommons.org/licenses/by/4.0/" rel="nofollow noopener">CC-BY</a>.&nbsp;Fits any Baratza Sette model, such as Sette 30 or Sette 270.  Baratza also sells a single-dose hopper: <a target="_blank" href="https://www.baratza.com/product/sette-single-dose-hopper-black-sp0101640" rel="nofollow noopener">https://www.baratza.com/product/sette-single-dose-hopper-black-sp0101640 </a>&nbsp;Note the <a target="_blank" href="https://makerworld.com/en/models/71226#profileId-75425" rel="nofollow noopener">handle</a> is currently under a different license (<a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">CC-BY-NC-SA</a>) with different terms than the hopper.

Single-Dose Hopper for Baratza Sette

Global

Print Profile(3)

Description

Comment & Rating (0)

This remix is based on

License

Related Models

Sir Hoppington the Grasshopper

Single Hand Vase

Round silica gel box with thread V2

can fun