Run Jerry, Run!
Run Jerry, Run!
Boost
278
393
16
Print Profile(2)
0.24mm layer, 2 walls, 15% infill
Designer
2.6 h
1 plate
![[Only 1 AMS] 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US345a69e1156196/53964244/instance/2024-02-28_8ccf6a95a8998.jpeg?image_process=resize,w_100/format,webp)
[Only 1 AMS] 0.2mm layer, 2 walls, 15% infill
2.7 h
2 plates
Boost
278
393
16
1
503
96
Released
Description
🐈🐭 There are other variants, checkout the entire collection!
🎅🦹♀️🧛🧝 Other characters in this collection!
Run away from Tom, Jerry ! You're close to be safe in your home!!
Print, install with double side tape !
Enjoy!
Comment & Rating (16)
All
I wish more uploaders would show or mention the number of colors and AMS needed. This models needs 6 colors as is and 2 AMS for a hands off print.
The designer has replied
0
Reply
you can see it on the print profile 😉
(Edited)
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
came out great!
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
Very nice print, good size, printed using smooth profile with bambu matt filaments, 2x AMS
0
Reply
Is there a way to print this with only one AMS? It looks like the top-most layers use all 6 colors, so you wouldn't be able to swap filaments to get by with only four.
The designer has replied
0
Reply
Hi, the only way is to reduce the number of colors, for example use the same for the ears and the skin, and maybe the tongue in black
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
Sehr schöne datei
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
0
Reply
Print Profile
[Only 1 AMS] 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld