Kansas City Chiefs Pat Mahomes Hueforge by marky3d

marky3d

Art>2D Art

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.04mm layer, 1 walls, 100% infill

Designer

5.1 h

1 plate

5.0(4)

Boost

Released

Description

Pat Mahomes!

Model is scaled to 85% in order to upload. I printed ay 100% (220x220). You can scale back up for printing. Slicing may take 5-10mins as a FYI.

Instructions for printing without AMS.

After slicing use the slider on the right hand side. When you get to the layer below right click and select add a pause. Do this for each layer described below. When the printer pauses manually change your filaments to the color indicated below.

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to red
At layer #15 (1.28mm) swap to Orange
At layer #17 (1.44mm) swap to White for the rest.

If you would like to display it on your wall use my mount here! Clean minimalistic design! https://makerworld.com/en/models/171997#profileId-188819

Please drop a like if you do print and enjoy my designs this it does help support!

If you really are enjoying my designs and want to support my efforts to continue creating consider buying me a coffee! As these things use a lot of filament to print and prototype HAHA! https://www.buymeacoffee.com/markyd17g

Comment & Rating (13)

@donsalsbury

I don't even know where to begin. This profile did nothing for me. Other Hueforge files on MW have the filament swaps all set so that I can print straight from the phone Handy app with zero prep. Instead I had to go into the desktop app and totally recreate the swaps by hand, and the layers provided in the description were not accurate based on the profile. I had to adjust the layer height to something that made sense for me, and then use the photos provided by the commenter to dial the colors in right. And for some reason one of the colors in the profile was set to ABS(??). Lastly, I printed out a half-scale test version so I could be sure this would work. At 0.08 layer height with the same 0.08 first layer height, the swaps were: Start with Black Red @ Layer 6 (0.48mm) Orange @ Layer 9 (0.72mm) White @ Layer 11 (0.88mm) Maybe it's just me and this won't work for anyone else; or maybe it will help, who knows. Good luck.

@ExecutiveMilk

Turned out great! Just now getting in to these Hueforge prints and this is my favorite so far. Thanks 😎

@Praus8577

Print Profile

0.04mm layer, 1 walls, 100% infill

turned out awesome!!

@jgaikwad

What layer is the red filament swap at?

The designer has replied

@jgaikwad

actually, maybe orange, red, and green get loaded in bambu, but no info on what layer to swap to them

@marky3d

Replying to @jgaikwad :

Apologies I did not up date the swaps.. It's fixed now. Swap Instructions: Start with Black At layer #5 (0.48mm) swap to red At layer #15 (1.28mm) swap to Orange At layer #17 (1.44mm) swap to White for the rest.

@user_4135403785

This cannot print with AMS?

The designer has replied

@marky3d

yes it can just use the included profile

@user_4135403785

Print Profile

0.04mm layer, 1 walls, 100% infill

FINALLY GOT IT TO PRINT RIGHT, VERY NICE! ☺️

@user_4135403785

Print settings are not compatible with selected printer is the message I see when trying to print this one. I m using AMS with all the right colors loaded. W hat is wrong? I have no issues with similar prints.

@Spyre

Print Profile

0.04mm layer, 1 walls, 100% infill

Awesome print, came out great.

@DDDrake4

When i try to set the colors to change at layer 5 it doesn't show that it is at 0.48mm like the directions say. No matter what layer height that i use it doesn't get to the 0.48mm height, what am i doing wrong and what has worked for other people? thanks