--------if you like my work please, follow me and spread some love giving some like and follow❤️---------
Today i want Introducie a meticulously crafted set of bookmarks, designed with precision and passion using Photoshop and Hueforge.
These bookmarks are not just functional accessories but a thoughtful gift for that special someone or an exquisite addition to your home decor❤️
These bookmark are simply resizable directly in Bambu Studio using the scale function as follow (Note that you must not modify Z axis dimensions):
-If stringing occour you can simply remove it using your lighter as follow:
Pass the flame for only few seconds and you will be surprised by the result, from left to right picture like magic😄
HUEFORGE Instructions:
-Cat:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Orange
At layer #11 (0.96mm) swap to Jade White for the rest.
-Planet:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Yellow
At layer #10 (0.88mm) swap to Orange
At layer #12 (1.04mm) swap to Jade White for the rest.
-Valley:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Yellow
At layer #10 (0.88mm) swap to Orange
At layer #12 (1.04mm) swap to Jade White for the rest.
-Carrots:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Yellow
At layer #10 (0.88mm) swap to Orange
At layer #12 (1.04mm) swap to Jade White for the rest.
If you want any modifications or variations, feel free to ask, if you have specific requests write to me privately, and I will do my best to fulfill your desires❤️
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.