IF YOU LIKE THIS MODEL GIVE ME A “THUMBS-UP” SO MORE PEOPLE CAN DISCOVER THIS MODEL. THANKS

THIS IS MY VERY OWN MODEL AND PROFILE ! NOTHING STOLEN OR REMIXED. JUST GOT MYSELF IMPRESSIONS FROM OTHERS MENTIONED BELOW !
 

V3
 

-also added a Honeycomb version to the existing ones with and without logo. This also increases Airflow by not loosing the protection purpose (You need to Slice it to see Results. Magic happens in the Slicer)

If you look into my profile you can find other Honeycomb style savers and improvements as this is my favourite design.

V2
 

Now there is a V2. I definitely recommend replacing yours to Version 2 in case there is a possipillity of the V1 one interfering with the very top Y-axis.

Protect your XY stepper motors from dust with this simple print. This snap on protective cap will keep dust and filament flakes away from your stepper motor and possibly increasing its lifespan. Doesn't require support/brim.

What's changed in version 2,

-!Important! Last version might get in the way if you are printing on the very top of the Y-axis or during calibration process, V2 is thinner to prevent this issue.
-Reinforced the clips in the Area where the belts go trough with a cut and made them overall longer and stronger
-Width of the clips against wall is slightly reduced. The reduced width ease the tension on the clip.
-Rounded corners to reduce possible wrapping and make them look more flushing.

V1
 

Provides cleaner look and keep the Stepper Motor free from filament flakes and dust.

For those of you afraight of the motor not getting enough air for cooling, keep in mind the belts are also running trough sone hole where air gets to cool the motor.

*I got myself impressions from 123cut's and nokiri's Models.
(https://makerworld.com/en/models/123793#profileId-181858)
(https://makerworld.com/en/models/156517#profileId-171458)