Remix based on multiple models, mainly based on the TILT PHONE STAND V2.0 Remixed by Matthew Ghost - MakerWorld and TILT PHONE STAND V2.0 Remixed by brady.bowling - MakerWorld + valuable feedback from users in comments!

A MUST-HAVE FOR ALL ENGINEERS, TECHNICIANS, CRAFTSMEN, HOBBYIST… JUST FOR ALL WHO LOVES TECHNICAL BASED THINGS!!!

Notable changes and improvements:

• added a hole for desk fixation by a screw in the rear part
• added small extruded holes for rubber legs at button part of the base
• base - more stable design for bigger smartphones; now you do not need to be worried about the stability!
• stand - added a bottom and top edge parts for better stability
• adjustable wheel - modified design, should be easier to adjust; also added a nice 3D effect on the top face :)
• small adjustments and improvements in the overall design…

Printing:

• PLA or PET-G
• organic supports for “base” part
• 0,20 mm layer height
• 0,40 mm nozzle size
• grid infill type
• 15% infill density
• 2 wall loops
• minimum 4 bottom layers (for a nicer embossed logo)

Changelog:

• Rev1 /03.02.2024/ - initial release
• Rev2 /04.02.2024/ - updates based on the feedback
  • modified “base” - cleaner part for smooth control of the adjustable gear
  • modified “base” - optimise holes for rubber legs at the bottom part of the base for a better print adhesion
  • modified “base” - add few chamfers and fillets for a gear part - better look, no more sharp edges
  • modified "adjustable gear" - change the logo part for a better print bed adhesion
  • NEW - added 2 versions of the base - A) hole under the connector for organic support; B) no hole under the connector - choose what you prefer more, both tested :)
• Rev3 (17.02.2024) - improved the design of “Gear” - more friendly to your fingers :)

From the original model:

• It is not necessary to glue the parts here. Everything is printed in one piece (please, use pre-sliced file)
• There is an improved guide groove that does not allow slipping.
• The gears fit together better, which allows more comfortable tilting.
• The adjustable gear contains a groove, which allows the exact position of the gears.
• No glue is needed.
• Smooth design!

FEEL FREE TO REPORT ANY ISSUES OR IDEAS—I CAN MODIFY THE MODEL FOR YOU!