Airbox drain plug for the Norden 901 and KTM 790/890 Adventure. Printed in Overture TPU 95A with no supports.
The inner diameter looks much smaller than the original drain plug but it's because I made an inner lip to make sure the foam would stay in.
I made a TPU and a ASA (ApolloX) version as I was a litte concerned with TPU and heat. I measured the TPU part at 70c while the bike was hot. The ASA part has the second rib removed as it's not flexible but it's a tight fit so should not come loose.
I made another version with FormFutura Python Flex 98A TPU as it's meant to be heat resistant to 138c. Should be no issue with the exhaust side now. Also added another profile with a 3mm longer body.