Test para comprobar la adhesion de la primera capa de la cama. Tambien sirve para limpiar la superficie de restos de una impresion anterior. Es una lámina de 0.2 que ocupa casi todo el campo imprimible de la cama para comprobar que la primera capa se adhiere por todas partes de la misma forma. Puedes usarla también como alfombrilla de raton si la imprimes con cama texturizada
Tuve que hacer este test porque descubri que en una esquina de la cama la adhesion no era buena aun habiendo limpiado correctamente la cama. Con este test pude comprobarlo, despues realicé una calibración total de la maquina (26 minutos aprox.) volví a realizar este test y ya si lo imprimió correctamente.
Test to check the adhesion of the first layer of the bed. It is a 0.2 sheet that occupies almost the entire printable field of the bed to check that the first layer adheres everywhere in the same way.
I had to do this test because I discovered that in one corner of the bed the adhesion was not good even after having cleaned the bed correctly. With this test I was able to verify it, then I performed a total calibration of the machine (26 minutes approx.) I performed this test again and it printed correctly.
You can also use it as a mouse pad if you print it with a textured bed.