⭐⭐⭐⭐⭐ Rate the project! ⭐⭐⭐⭐⭐
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Green Transmission Distance: 10
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Green
At layer #15 (1.28mm) swap to White for the rest.