Master Spool for Das Filament Refills
Copyright Claim
Master Spool for Das Filament Refills
Boost
15
9
5
GIF
Print Profile(3)
P1S
Designer
4.5 h
2 plates
X1C
Designer
4.5 h
2 plates
A1
Designer
4.9 h
2 plates
Boost
15
9
5
0
37
15
Released
Description
I refuse your Master Spool and substitute my own.
Here you have a so-called Master Spool for Refills of Das Filament (dasfilament.de) 100% AMS compatible.
Das Filament offers a spool available to download but you will need more than 300 grams to print it. This is because the way both halves of the spool are attached to each other. I went for another approach to that and instead of designing and printing a ginormous thread, I just used 4 M3 threaded inserts and screws.
The total weight of this spool including screws and inserts is aprox. 150 grams.
Try it out!
spool
reusable filament spool
reusable spool
das filament
refill adapter
refill
refill spool
ams
ams spool
ams spool adapter
Documentation (2)
Bill of Materials (1)
Bill of Materials Master Spool_3d4d0d1e-83bc-4ddb-b84a-261fc9f3005d.pdf
Assembly Guide (1)
Master Spool assembly_42b084c8-1e7e-47d0-8d3e-c4ed76a25695.pdf
Comment & Rating (5)
All
Fits Perfect, thx.
The designer has replied
0
Reply
Glad you like it!
0
Reply
Hi, is the AMS lid still closed? Or does the roll then rub against the lid?
The designer has replied
0
Reply
Hi. The lids closes as per usual. It is left open in the pictures for displaying purposes only. To be precise, the spool has a diameter of 200mm, which is 2mm smaller than the specified maximum.
1
Reply
Print Profile
P1S
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld