Pinewood Derby Car Display Shelf (Wall Mounted)

The Pinewood Derby is a timeless tradition of the BSA, Cub Scouts, hobbyists, and competitive racers everywhere! What better way to show off and display your creativity after the big race than with one of our customizable wall mount display shelves.

We currently have 2 different versions of the mounts available:

V1 is designed with wheel cut-outs matching the standards of (most) Cub Scout Pinewood Derby car dimensions of (4.25”-4.50” wheel base and a maximum of 2.75” width outside of wheel to outside of wheel). These shelves will securely hold your car in place so that it doesn’t roll off of the shelf without the need for any additional hardware to hold it in place.

V2 is designed utilizing a rail that runs down the center of the platform that will hold your wheels up off of the platform for our more competitive racing customers or anyone worried about flat spots from resting on the wheels. The rail is made to the following dimensions: 130mm length, 40mm width, and 16mm height. These dimensions should accommodate most Pinewood Derby car builds but feel free to reach out to us if you need a more custom fit!

-Mounts easily with (2) #8 Phillips head screws

Note:**

-download includes 3 separate .stl files

-V2 “Solid” and V2 “Vented” are dimensionally the same, just a slightly different design for the rail. (see pictures)

-Proudly designed and made by BlackHand 3D in the USA

PLA

.12mm layer height

20% grid infill

-print vertically with wall plate facing the bed for best results