Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Esun Bone White Transmission Distance: 5
PLA+ Sunlu Coffee Transmission Distance: 3
PLA+ Esun Bone White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #20 (1.68mm) swap to Bone White
At layer #23 (1.92mm) swap to Coffee
At layer #25 (2.08mm) swap to Bone White for the rest.