龟仙人和悟空Roshi&Goku：

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

打印100%填充，第一层0.16mm，其他层高0.04mm

Filaments Used:(Can be replaced with ‘K’ materials, other brands of materials please verify the TD value)

材料使用：（可以用K家材料替代，其它品牌材料请自行校验TD值）
PLA BambuLab Basic Jade White Transmission Distance: 5 白色
PLA BambuLab Basic Yellow Transmission Distance: 6 黄色
PLA BambuLab Bronze Transmission Distance: 0.8 古铜色
PLA BambuLab Basic Black Transmission Distance: 0.6 黑色

Swap Instructions:

扫层说明：
Start with Jade White 以白色开始
At layer #6 (0.36mm) swap to Yellow 第六层开始换成黄色
At layer #8 (0.44mm) swap to Bronze 第8层开始换成古铜色
At layer #12 (0.6mm) swap to Black for the rest. 第12层换成黑色直到打印结束

----------------------------------------------------------以下雷同就不翻译了----------------------------------------------------

龟仙人Master Roshi：

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Beige (or skin) Transmission Distance: 8
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Black Transmission Distance: 0.6

Swap Instructions:
Start with Jade White
At layer #6 (0.36mm) swap to Beige
At layer #8 (0.44mm) swap to Green
At layer #12 (0.6mm) swap to Brown
At layer #16 (0.76mm) swap to Black for the rest.
----------------------------------------------------------------------------------------------------------------------------------------------

贝吉塔Vegeta：

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Black Transmission Distance: 0.6

Swap Instructions:
Start with Jade White
At layer #7 (0.4mm) swap to Yellow
At layer #11 (0.56mm) swap to Blue
At layer #14 (0.68mm) swap to Black for the rest.

----------------------------------------------------------------------------------------------------------------------------

孙悟空Son Goku：

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Black Transmission Distance: 0.6

Swap Instructions:
Start with Jade White
At layer #8 (0.44mm) swap to Orange
At layer #12 (0.6mm) swap to Blue
At layer #14 (0.68mm) swap to Black for the rest.

-----------------------------------------------------------------------------------------------------------------------

以上文件是由hueforge创建，想了解了解更多的请看以下视频：