Desk paper tray and organizer “Montagne”

Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.

A big desk tray that can fit up to DIN-A4 and US-Letter sized paper. Store stuff you want to be sorted and out of sight to focus on your work. The center Mountain has an indentation that serves as handle. You can optionally paint the scenery in the season of your choice.

There are 4 different versions included for different printer sizes and adhesion capabilities (premade mouse ears!)

Version 1
For a medium sized machine with excellent bed adhesion
Required build volume: 240 x 240 x 100 mm
Parts: Body_Part_1, Body_Part_2, Lid_part_1, Lid_Part_2, Connector

• Print all parts
• Glue together Body_Part_1 and Body_Part_2
• Glue together Lid_Part_1 and Lid_part_2 while inserting the stabilizing Connector

Version 2
For a medium sized machine with regular bed adhesion – the one seen in the pictures
Required build volume: 254 x 254 x 100 mm (works on a P1P)
Parts: Body_Part_1_Mouse, Body_Part_2_Mouse, Lid_part_1_Mouse, Lid_Part_2_Mouse, Connector

• Print all parts
• Remove the mouse ears with a cutter
• Glue together Body_Part_1 and Body_Part_2
• Glue together Lid_Part_1 and Lid_part_2 while inserting the stabilizing Connector

Version 3
For a large sized machine with excellent bed adhesion
Required build volume: 330 x 330 x 100 mm (works on a P1P)
Parts: Body, Lid

• Print all parts

Version 4
For a large sized machine with regular bed adhesion
Required build volume: 350 x 350x 100 mm
Parts: Body_ Mouse, Lid_Mouse

• Print all parts
• Remove the mouse ears with a cutter

Size assembled: 330x 234 x 106 mm
This is the V3

Material usage: 800 g

Material: PLA
Print direction: stls are rotated correctly, check images
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%

Support
Body_Part_1 and Body_Part_1_Mouse: Yes – only the small overhanging part
All the other files: None