Little dragons game,

Once upon a time, there were 16 baby dragons, born in siblings of 4, in each of the 4 primary elements,

in order to have the strength and courage to climb and make their first flight, they have to pass through the other 3 elements,

this is a derivative of the "little horses" or "dada" game,

I wanted to make this game in 3D, to add a bit of relief,

I modeled 4 different baby dragons according to one of the elements.

so you'll find the "fire", "air", "wind" and "water" dragons.

I printed the counters in resin and FDM (0.12mm).

the tray measures 32/32cm and 35cm high

pawns are 2.5cm high

I used 5mm steel balls to rotate the board

Enjoy the game.

#DRAGONXCULTS

Once upon a time, there were 16 baby dragons, born in families of 4, in each of the 4 primary elements,

in order to have the strength and courage to climb and make their first flight, they must cross the other 3 elements,

it is a derivative of the game of "little horses" or the game of "dada",

I wanted to make this game in 3D, in order to add a little relief,

I modeled 4 different baby dragons based on one of the elements.

so you will find the dragon of "fire", "air", "wind" and "water".

I printed the pawns in resin and in FDM (0.12mm)

the tray measures 32/32cm and 35cm high

the pawns measure 2.5cm high

I used 5mm steel balls to turn the plate

Good game everyone.

#DRAGONXCULTS

without support except "carré vis" element

layer height 0.2 for all except pawn: 0.12, 35micron in resin