eren jaeger titan

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA+ Sunlu Red Transmission Distance: 6

PLA+ Sunlu Pure Yellow Transmission Distance: 5

PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:

Start with Black

At layer #7 (0.88mm) swap to Red

At layer #13 (1.2mm) swap to Yellow

At layer #18 (1.6mm) swap to White for the rest.