Universal Filament Spool AMS Adapter Bambu by SG499_Lab

SG499_Lab

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.24mm layer, 3 walls, 15% infill

1.7 h

1 plate

4.4(7)

Boost

Released

Description

Fit in every brand of filament spool.
If you want to print in sport/ludicrous mode i suggest you to add brim for better adhesion.
Printed in PETG is the perfect combination between elasticity and rigidity, also PLA works great but it's more difficult to fit in very small spool hole.

Comment & Rating (13)

@Korx

Oh, someone got the same idea before me ;)

The designer has replied

@stefanogiannini

😁

@tprintr.3d

what is it for?

The designer has replied

@stefanogiannini

Some filament spool have the hole too big to fit in AMS and they fall off, with this adapter you solve the issue

@Solitaire

Print Profile

0.24mm layer, 3 walls, 15% infill

Other Issues:Not suitable for the Bambu Labs AMS. Width of adapter is OK at 59.7mm. Outer diameter is 81mm - which is too small for any of my cardboard spools (eSUN, Overture, Polymaker...). Even the Bambu cardboard core has an inside diameter of 82.5mm. The inner diameter of the print is only 55mm so there is no way it will fit onto the Bambu Labs spool.

@stefanogiannini

what do you mean with "not suitable with bambulab ams"? This is for bambulab A1 series ams

(Edited)

@Solitaire

Replying to @stefanogiannini :

Then please put that in your description. The other issue about the size still stands. The photo attached shows your model in an eSUN spool core. There is about a 4mm gap between the fins and the core.