This is an Asian/Chinese inspired picture frame for HueForge prints. It will fit a 200 X 200mm picture. The Hueforge I made is included to download but you can make your own and it will fit. Just a little glue and it will look like it was always suppose to be like that.

HueForge setting:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyLite Pro Metallic Red Transmission Distance: 0.5
PLA Overture Silk Gold Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Overture Silk Gold Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Metallic Red
At layer #7 (0.64mm) swap to Gold
At layer #15 (1.28mm) swap to Jade White
At layer #18 (1.52mm) swap to Gold for the rest.