Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Eryone Black Transmission Distance: 5
PLA Eryone Grey Transmission Distance: 5
PLA Eryone Yellow Transmission Distance: 5
PLA Eryone White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #15 (1.28mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.

LEAVE THE SUPPORTS ON