Cannabis - HueForge Wall Art by Quantum.Grower

Quantum.Grower

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 2 walls, 100% infill

Designer

5.1 h

1 plate

4.7(7)

Boost

Released

Description

This HueForge model is a photo of a cannabis strain called 10th Planet, by Ethos Genetics. This plant was grown by me last year and the photo was taken from my Instagram. Please leave a comment and a rating if you enjoy this model. Thank you!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ IIID Max Black Transmission Distance: 0.5
PLA+ IIID Max Green Forest Transmission Distance: 1.8
PLA+ IIID Max Apple Green Transmission Distance: 4
PLA+ IIID Max White Transmission Distance: 5.6

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Green Forest
At layer #12 (1.04mm) swap to Apple Green
At layer #18 (1.52mm) swap to White for the rest.

You can ignore the warning in Bambu Studio regarding floating regions.

Comment & Rating (13)

@ElonMckenna

Print Profile

0.08mm layer, 2 walls, 100% infill

The designer has replied

@Quantum.Grower

nicely done! thanks for the share and rating 🤘🏻🔥🙌🏻

@JacktheHack

Print Profile

0.08mm layer, 2 walls, 100% infill

(Edited)

The designer has replied

@Quantum.Grower

It came out great 🤘🏻 Thanks for sharing your print and rating!

@user_1048199360

hola no tendrias la version sin AMS? gracias

The designer has replied

@Quantum.Grower

If you dont have an AMS you'll have to manually swap filaments at the specific heights in your Slicer. Settings are listed below: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ IIID Max Black Transmission Distance: 0.5 PLA+ IIID Max Green Forest Transmission Distance: 1.8 PLA+ IIID Max Apple Green Transmission Distance: 4 PLA+ IIID Max White Transmission Distance: 5.6 Swap Instructions: Start with BlackAt layer #7 (0.64mm) swap to Green ForestAt layer #12 (1.04mm) swap to Apple GreenAt layer #18 (1.52mm) swap to White for the rest.

@Hambyeverett

Print Profile

0.08mm layer, 2 walls, 100% infill

came out great

(Edited)

The designer has replied

@Quantum.Grower

Glad to hear it came out great! Thanks for the feedback and rating!