hueforge de stormtrooper en el desierto con varios robots en compañia
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA smartfil marron Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to marron
At layer #13 (1.12mm) swap to Yellow
At layer #15 (1.28mm) swap to Jade White for the rest.