I took the Remix and Remixed it again, I wanted a smaller case that was only to protect the router only. I have another bag for all the cables that I carry with me when I travel.
I also added a logo on top, So I know what it is without having to use a label maker.
V2 Re oriented the Logo to be facing you as you open it.
Note: I did all modifications in Bambu Studio, so there are “Negative” cubes removing artifacts where I cut the case to make it work for me.
You will need M3 Screws. I used two M3*12 for each hinge and two M3*12 for the top of the latch. I didn't have the correct length bolt for the bottom, It uses the same M3, but if you want to use one bolt, You will need a M3*30.