Print Profile(1)
0.2mm nozzle, 0.12mm layer, 4 walls, 10% infill
Designer
43.2 h
11 plates
Boost
118
148
15
9
108
30
Released
Description
Custom drinks coasters for all 2024 F1 teams. Printed with a 0.2mm nozzle to get better details.
UPDATE April 28, 2024: I made a very small change to all coasters to give them a slightly better rounded edge and smoother sides.
Coasters:
- 0.2mm nozzle
- 0.12mm layer height
Holder (6 and 10 coasters):
- 0.4mm nozzle
- 0.2mm layer height
- Scale on Z axis to your preferred number of coasters to hold. Coasters are 5mm thick, allow 4mm for holder base. So if you want a hold for 4 coasters scale Z axis to (4x5+4) =24mm
Comment & Rating (15)
All
Boosted
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 10% infill
Excellent! added round 95mm x 1mm self adhersive cork, perfect finish !
Cut at 3.5mm, it gives about 4.6mm with the cork
(Edited)
The designer has replied
0
Reply
awesome! where did you get the cork? that's a great idea.
0
Reply
Boosted
Replying to @BangelCustomWW
Hi! on amazon, I took 95mm to leave a small gap all around I think it is nicer than the exact same size
(Edited)
1
Reply
Replying to @MarcelBichon
Thanks, I'm going to try that out.
0
Reply
this looks great but everytime i import it into bambu it comes up with the image as 3d sticking out from the coaster, cant figure out why
The designer has replied
1
Reply
Hi, thanks for the comment. They print face down on the bed so even though the logo is sticking out it'll just cut it off and print smooth. I'll take another run at cutting them cleanly tonight and re-upload just so there isn't any confusion. I appreciate the heads up.
1
Reply
Ok, they should be all fixed up now. Give the updated file a try and let me know how it works out.
1
Reply
Boosted
Excellent work!
The designer has replied
1
Reply
Thanks so much!
0
Reply
Boosted
Very nice model and printed perfectly.
The designer has replied
0
Reply
Thanks for the comment! Glad you like them.
0
Reply
Very nice, even printing with a 0.4 nozzle, as I don't have a 0.2 (yet).
1
Reply
Boosted
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 10% infill
1
Reply
Boosted
Print Profile
0.2mm nozzle, 0.12mm layer, 4 walls, 10% infill
1
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld