Lars85

thank you for the print i was actually wondering if someone made a centering thing but never checked till now hahah

Ashley

turned out amazing, i did change some settings and added a profile before there was one uploaded so i cant rate it now, so im sorry for that 

image0(2)_f93b34e3-bd67-49b5-8540-373cc6392544.jpeg

image1_3afa8a43-551d-4b8c-8851-df332ab5ac8f.jpeg

image1_2b4e30a2-2067-429a-a066-3d088b729ba6.webp

plate_1.png

0.2mm Layer HeightNo SupportNo RaftNo Brim

0.2mm layer, 2 walls, 15% infill

thumbnail_IMG_8924_03dd2b81-cc96-4300-95bc-a627448da904.webp

<ul><li>0.2 layer height</li><li>2 walls</li><li>5% infill</li></ul>

0.2mm layer, 2 walls, 5% infill

Here is a small holder for the RA2 for the Xtool F1 Laser.So you dont need to align it in the middle. Just replace the baseplate with the printed one and the rotary fit and the middle is in the center.&nbsp;&nbsp;Pictures will follow

Print Profile(2)

Description

Comment & Rating (3)

License

Related Models

20oz Polar Camel Tumbler Lid Jig

XTool RA2 Pro Backstop plate

F1 Rc car 1/10

xtool RA2 Pro Level Holder

XTool RA2 Plate for F1