This is my third Samsung Galaxy S24 case - Voronoi - a remix from lucas_sp12.
No support is required in the slicer settings :-)
The green parts in the picture are the supports for easy printing and must be removed after. Removing can be easy or difficult depending on material and printer.
I use filament TPU shore 95A and the Prusaslicer project file, nozzle: 220 °C, bed: 50 °C.
See also Version 1 --> https://makerworld.com/en/models/229309
and Version 2 with AI text --> https://makerworld.com/en/models/229311
Happy Printing
Toni
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Dies ist meine dritte Samsung Galaxy S24 Hülle jetzt Version 3 - ein Remix von lucas_sp12.
In den Slicer Einstellungen ist keine Unterstützung erforderlich :-)
Die grünen Teile im Bild dienen lediglich als Stützen zum einfachen Drucken und müssen anschließend entfernt werden. Das Entfernen kann je nach Material und Drucker einfach oder schwierig sein.
Ich benutzte Filament TPU härte 95A und das Prusaslicer project, Düse: 220 °C, Bed: 50 °C.
Schau auch Version 1 --> https://makerworld.com/en/models/229309
und Version 2 mit KI-Text --> https://makerworld.com/en/models/229311
Viel Spaß beim Drucken
Toni
Category: Mobile Phone