English
This is a mount for a clothline holder, that can be used in a Fiat Ducato, Citroen Jumper, Peugeot Boxer, RAM Promaster, some VW crafter, Mercedes Benz Sprinter and other transporters sliding door rails.
You can use any clothline holder similar to the Vileda Express radiator clothline.
Each part must be printed twice to get a full set.
Update 2020-12-12
For those who have a problem with their filament while printing thin walls, the plug Big-Bumper-V4.stl should be used instead of Big-Bumper-V2.stl or Big-Bumper-V2a.stl.
The Big-Bumper-V2-TPU-Part.stl will fit Big-Bumper-V4.stl,too.
( Update 2024-04-18: This Parts are no longer included in this project! )
Update 2021-07-20
We have made a small change to Trockner-V3c.stl already earlier this year an tested it with a VW Crafter RV and some Mercedes Benz Sprinter. It works too.
Deutsch
Dies ist eine Halterung für einen Wäscheleinenhalter Type Vileda Express , der in den Schiebetürschienen eines Fiat Ducato, Citroen Jumper, Peugeot Boxer, RAM Promaster, einiger VW Crafter, Mercedes Benz Sprinter und anderer Transporter verwendet werden kann.
Sie können jeden Wäscheleinenhalter verwenden, der dem Vileda Express -Heizkörperwäscheleine ähnelt.Jedes Teil muss zweimal gedruckt werden, um einen vollständigen Satz zu erhalten.
Update 12.12.2020
Wer beim Drucken dünner Wände ein Problem mit seinem Filament hat, sollte statt Big-Bumper-V2.stl oder Big-Bumper-V2a.stl den Stecker Big-Bumper-V4.stl verwenden.Das Big-Bumper-V2-TPU-Part.stl passt auch auf Big-Bumper-V4.stl.(Update 18.04.2024: Diese Teile sind in diesem Projekt nicht mehr enthalten!)
Update 20.07.2021
Wir haben bereits Anfang des Jahres eine kleine Änderung an Trockner-V3c.stl vorgenommen und ihn mit einem VW Crafter RV und einigen Mercedes Benz Sprinter getestet. Hier funktioniert die Aufhängung jetzt auch.
Product | Compatible | Annotation | Average Price |
---|---|---|---|
Vileda Express | YES | Still the best choice! | 6 - 13 € |
Vileda Sunset 100 Balkontrockner | NO |
| |
Gimi Airy Wäschetrockner | YES | Tested twice in 2020 and 2023 | 4 - 12 € |
SIDCO Heizkörper Wäschetrockner | YES | Tested in 2020 | 11 - 14 € |
Stimo Wäscheständer | NO | Tested in 2023 | 11 - 14 € |
Relaxdays Hängetrockner | YES | Tested twice in 2020 and 2021 ( 4 Meter! ) | 6 - 19 € |
Relaxdays Hängetrockner 4,80m | YES | Tested by User in 2020 and 2021. Please note the width of the laundry rack! | 16 -25 € |
Remove the original end caps from the frame. | |
Assemble cone and TPU cover together. | |
Push the cones onto the pipes.
Attention:Due to the powder coating, the cones may not fit! Do not use too much force. The cones can burst! | |
Put the upper part of cone in boiling water for about one to two minutes. Then take it out of the water and press it onto the pipes.
| |
Now the cones should fit on to the pipes. |