USB C with power delivery and USB A quick charge adapter for VOLVO P3 vehicles, should fit S80, V70, XC70 models.

Has two usb-c (PD3.0) ports and two usb-a QC ports, recommend to hardwire this to your 12V socket.

THIS IS RECCOMENDED TO HARDWIRE INTO YOUR CAR, DO THIS AT YOUR OWN RISK!!!!!!!!
OR EVEN BETTER CONTACT YOUR CAR MECHANIC TO PUT THIS IN!!!

• Print in orientation it comes in
• I printed mine with fuzzy skin 0.15 0.15 to have a better look overall
• No supports needed
• It is a tight fit
• 6 M3 threaded inserts are needed
• 6 M3x8mm bolts needed
• 2 USB-C PD adapter module is needed (https://www.aliexpress.com/item/1005005514748180.html?spm=a2g0o.order_list.order_list_main.116.4da31802KzPviu)
• 1 USB-A QC adapter module is needed (https://www.aliexpress.com/item/1005002433632102.html?spm=a2g0o.order_list.order_list_main.286.4da31802KzPviu)

1. Print both parts
2. Insert threaded inserts into body
   
3. Insert threaded inserts into usb-c PD adapters clamp
4. Solder cables to USB-C PD adapter modules and to QC module
5. Insert USB-A QC module align with 4 threaded inserts and tighten bolts with alen key
6. Insert USB-C PD modules, it is a tight fit, so be careful
7. After both USB-C PD modules inserted put in printed clamp part
   
8. Align inserts through holes in front and tighten with m3 bolts
   
9. Connect all module cables together
10. Drill a hole through console bottom to hardwire this in. When removed hole will be covered with rubber pad that is usually in that location
11. Finished look