Hexagon Fidget with 2x2 Brick
Hexagon Fidget with 2x2 Brick
Print Profile(2)
Description
My 2x2 brick Hexagon Fidget 🙂
Not much to say… just print and share your prints and what you've build with it 😁
The brick part was optimised for 3D printing and extensively tested to work with original bricks. Tested as well with several PLA filaments. It works very well.
Checkout as well some of my other designs
╭─━━━━━━━━━━━━━━━━━━━━─╮
Buy me a ☕️ or a 🍺
https://www.buymeacoffee.com/dpjrodrigues
╰─━━━━━━━━━━━━━━━━━━━━─╯
Additional Notes:
Most people normally do not put a 1x1 in the middle hole in the bottom part and is not easy to make it work in 3d printed parts but I've tried as much as I could to make it work without losing the strength. I found that for most of my Filaments 0.06 in X-Y hole compensation works.
I left it as 0 in the profiles because the best is really to put other type of bricks, 2x2, 2x1, etc…
Important: Proper Printer calibration is quite important otherwise print may not work at all. If it doesn't work for you please calibrate your printer and/or make sure filament is dried… stringing may bond the different pieces.
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
