Tesial Design

Didn't even know I needed this until right now! So Cute!! Ty!

NotToday024

JJTechPrints

Picture_it

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

cover

Rhino '_f8ce1365-5a8b-4701-bd23-0ea821db22db.png

IMG_9817_548b716e-a287-4226-8c92-8ef7a73ede02.jpg

IMG_9821_9dc78549-b28c-43f5-8f7e-7ee2a92d8cb8.jpg

IMG_9823_52242a1c-66ff-41ec-8b72-0083cc3fb115.jpg

IMG_9825_5635a334-6227-4993-be06-713b1301a98a.webp

plate_1.png

<ul><li>0.2mm height</li><li>nozzle, 0.1mm layer</li><li>4 walls</li><li>15% infill</li></ul>

PXL_20240428_152443439_ab9adb36-27c8-4597-8613-7e9c0f784972.webp

plate_1.webp

PXL_20240428_152525096_8cca2a56-185b-4f6f-89b5-23531c63046d.webp

PXL_20240428_152509463_eac9b916-2351-4ef3-bd59-008c340c1e54.webp

PXL_20240428_152122572_3358c27d-108d-4ba3-9147-84f2fbf90767.webp

PXL_20240428_152116877_9ce3222c-6491-4659-918f-9810d836b0a7.webp

PXL_20240428_152111735_e6803e6d-0bac-4a0b-8ed3-c462bf699077.webp

This model is really cute. I've updated the print profile to include the latest iteration of trying to print with as few artifacts on the feet as possible. This current profile should allow anyone to print the rhino very well. &nbsp;Photos were taken after removing supports but do not include any filing or sanding. &nbsp;Enjoy

rhino, 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Here&#39;s a tiny rhinoceros that can be printed quickly for 2gr of filament. The supports are necessary and the current angle is ideal. &nbsp;Enjoy.

Lil Rhino

Global

Print Profile(2)

Description

Comment & Rating (6)

License

Related Models

rhino flexi

Rhino 3D Puzzle by Pork3D.com

Stylized Rhino

Rhino