Couldn't find a 3d-printable Digital Harinezumi replacement and always struggled with constantly having to change expensive batteries, so i made this.

This one is for the second version of the Harinezumi but it should fit with the other ones as well or should at least be easily adaptable for them with some sanding if needed.

Parts should all be printable without support, holes and buttons have some tolerance built in but might need a bit of wiggling or sanding depending on filament and settings.

The battery case at the bottom has space for various batteries, personally I went with a Keeppower 26650 (5200mAh 3-6V-3-7V) which is rechargeable via micro usb at the bottom of the case. You will need to lead the wires through the connecting holes and solder them either onto the battery ends and fasten it with hot glue or glue contacts into the case and place the battery between them,

This is still a work in progress, I have some ideas how to improve upon this design but for now it works quite well for what it is.

Further this doesn't include the function to switch the camera from normal to macro OR the ability to call up the menu. I'm planning to add these in a later version but feel free to remix this if you need them urgently. For now it's pretty much just point and shoot.

For access to the micro sd slot you will either need to take out the pcb or add an extension into the slot.